Wall mounted heat recovery home air ventilation systems energy recovery ventilation system

Wall mounted heat recovery home air ventilation systems energy recovery ventilation system,
Air Conditioner, Air Conditioning, heat recovery ventilator, hvac system, Ventilation, Ventilator,
 

In order to meet the needs of customers all around the world, Holtop developed and produced two versions of Wall Mounted Energy Recovery Ventilation, one version can be equipped with a PM2.5 sensor, and the other form can be equipped with a CO2 sensor. Users can select the version according to the actual needs.
When the room is crowded, the CO2 concentration will be higher than normal,  it is recommended to choose a version that can equip with a CO2 Sensor. The CO2 sensor will detect the CO2 concentration value, then the ERV will automatically run at high speed.

Specifications of CO2 Sensor Version Wall Mounted ERV Energy Recovery Ventilation

Comprehensive Timely Monitoring,

Intelligent Multiple Purification Modes

SWITCH Original function of “Pure L” “Pure L” “Pure H”,

30 mins Quick Deeply Clean

Under mode “Auto”, the ERV will adjust supply air volume according to indoor CO2 range, corresponding speed as below:

Remark: To ensure sufficient indoor fresh air supply, the speed will rise automatically after mode “Auto” runs for a period of time, and will return to the original speed after 5-10 minutes. During this period, the speed displayed on the screen is different from the picture above.

 Reduce more than 90% of indoor air pollutants within 30 mins.
BLDC motors to save energy,
Ductless installation design,
Multiple filters with 99% filtration efficiency,
Machine body control, remote controller, WIFI controller